RODAC air filter with 1/4" pressure regulator
Operating temperature: 40-140°F (5-60°C)
Maximum pressure: 150 PSI
Housing: Polycarbonate
Helps clean the air source, filters moisture from the air and provides a relatively stable air source
RODAC air filter with 1/4" pressure regulator
Operating temperature: 40-140°F (5-60°C)
Maximum pressure: 150 PSI
Housing: Polycarbonate
Helps clean the air source, filters moisture from the air and provides a relatively stable air source
Mounts directly to an air hose This chuck has a built-in shut-off valve to stop airflow when chuck is not in use The air will escape only during inflation (in contact with the tire valve) Angled head can inflate either side
Mounts directly to an air hose This chuck has a built-in shut-off valve to stop airflow when chuck is not in use The air will escape only during inflation (in contact with the tire valve) Angled head can inflate either side
1/4" F NPT Replacement chuck for Topring gauge Since they do not have a built-in shut-off valve, air will flow freely if installed directly on an air hose They must be installed on an inflator gauge which controls airflow For hard-to-reach tire valves (trucks, buses and tractors)
1/4" F NPT Replacement chuck for Topring gauge Since they do not have a built-in shut-off valve, air will flow freely if installed directly on an air hose They must be installed on an inflator gauge which controls airflow For hard-to-reach tire valves (trucks, buses and tractors)
1/4 F NPT Mounts directly to an air hose This chuck has a built-in shut-off valve to stop airflow when chuck is not in use The air will escape only during inflation (in contact with the tire valve)
1/4 F NPT Mounts directly to an air hose This chuck has a built-in shut-off valve to stop airflow when chuck is not in use The air will escape only during inflation (in contact with the tire valve)
The RODAC Mini Air Regulator includes a pressure gauge calibrated from 0 to 160 PSI and a 1/4" NPT inlet port for most air tools to adjust pressure differences.
The RODAC Mini Air Regulator includes a pressure gauge calibrated from 0 to 160 PSI and a 1/4" NPT inlet port for most air tools to adjust pressure differences.