Hex Head Multi-Spline Screw Extractors - 15 Pieces 1/8" to 9/16"

Hex Head Extractor Recommended drill bit: 13/32" Bolt diameter: 3/4" Hex head: 1/2"

Performance Tool W87022 GM Power Steering Pump Pulley Setter and Puller

Capacity : 16 mm (21/32") Length : 130 mm Weight : 210 gr

Hex Head Extractor Recommended drill bit: 3/8" Bolt diameter: 11/16" Hex head: 1/2"

Hex Head Extractor Recommended drill bit: 5/16" Bolt diameter: 9/16" Hex head: 1/2"

Hex Head Extractor Recommended drill bit: 9/32" Bolt diameter: 1/2" Hex head: 1/2"

The RODAC pad separator offers a 2¼" capacity.

The RODAC 2-jaw puller has fine threads, a 3½" reach and 6" spacing. It offers you a load capacity of 5 tons.

With the RODAC hydraulic puller set, the force required for quick and easy dismantling with minimal effort up to 10 tons can be produced without difficulty.

Hex Head Extractor Recommended drill bit: 1/4" Bolt diameter: 7/16" Hex head: 1/2"

The RODAC bearing separator can be adjusted from 75 to 105 MM.

Set of 25 bolt extractors: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2", 17/32", 9/16", 19/32", 5/8", 21/32", 11/16", 23/32", 3/4", 25/32", 13/16", 27/32", and 7/8", with multi-fluted hex head. These extractors are used to remove studs, hoses, screws, grease fittings etc...they fit most bolts from 1/8" to 7/8" and can be used with wrenches or sockets....

Hex Head Extractor Recommended drill bit: 3/16" Bolt diameter: 5/16" Hex head: 1/2"

Extractor Use drill size: 5/64" Removes bolts and screws: 3/32" - 5/32", 2.5 - 4 mm, #3 - 6

Hex Head Multi-Spline Screw Extractors - 10 Pieces 1/8" to 13/32"

Performance Tool W134DB 3-leg clutch extractor set 3", 4", 5", 6"

Hex Head Extractor Recommended drill bit: 5/32" Bolt diameter: 1/4" Hex head: 1/2"

2 arms Size : 80 mm Ton max. : 4 Weight : 1080 gr

RODAC 7 piece square puller set in CRMO steel for studs. Sizes: 1/8", 3/16", 15/64", 5/16", 3/8", 15/32" and 9/16".

Performance Tool W135P 3-jaw gear puller

Extractor Use drill size: 1/4" Removes bolts and screws: 9/32" - 3/8", 1/8" NPT, 1/8" BSP, 8 - 10 mm

RODAC 14 piece pad puller and separator kit in sizes ranging from 9/32" to 3". Packaged in a red hard case.

Extractor Use drill size: 19/64" Removes bolts and screws: 3/8" - 5/8", 1/4" NPT, 1/4" BSP, 10 - 16 mm