4 amp battery charger/maintainer is compatible with any AGM, GEL, or WET automotive or marine 12V battery
Fully automatic high frequency charging; Offers 3 ways to connect: 12V DC accessory plug, powder coated battery clamps, or battery terminal rings
Features an IP67 rating which certifies a completely sealed, waterproof and dust proof...
4 amp battery charger/maintainer is compatible with any AGM, GEL, or WET automotive or marine 12V battery
Fully automatic high frequency charging; Offers 3 ways to connect: 12V DC accessory plug, powder coated battery clamps, or battery terminal rings
Features an IP67 rating which certifies a completely sealed, waterproof and dust proof...
Quickly and accurately diagnose fuel injection problems.
Adapters for most foreign and domestic fuel systems.
Includes universal inline adapter for unique systems.
Quickly and accurately diagnose fuel injection problems.
Adapters for most foreign and domestic fuel systems.
Includes universal inline adapter for unique systems.
The tester kit tests low voltage up to 28 volts. Also finds electrical shorts, checks polarity, detects battery drain, and checks circuits from a distance. Heavy-duty coil cord extends over 8 feet. Detachable, spring-loaded hook pulls the center of the wire into the probe every time. Attach alligator clip to the probe when a clip-on connection is needed.
The tester kit tests low voltage up to 28 volts. Also finds electrical shorts, checks polarity, detects battery drain, and checks circuits from a distance. Heavy-duty coil cord extends over 8 feet. Detachable, spring-loaded hook pulls the center of the wire into the probe every time. Attach alligator clip to the probe when a clip-on connection is needed.
A 2-in-1 Tester that Tests Circuits up to 12 Volts and Works as a Jumper Wire for Power or Ground. Heavy-duty circuit tester for checking low voltage up to 12 volts. By depressing the red button the tester becomes a jumper for powering electrical components or a ground. The probe, handle, cord and clamp are reinforced for durability. Comes with a strain relief spring on the cord.
A 2-in-1 Tester that Tests Circuits up to 12 Volts and Works as a Jumper Wire for Power or Ground. Heavy-duty circuit tester for checking low voltage up to 12 volts. By depressing the red button the tester becomes a jumper for powering electrical components or a ground. The probe, handle, cord and clamp are reinforced for durability. Comes with a strain relief spring on the cord.
Useful for inspecting the engine compartment, valves, combustion chamber and other hard-to-reach areas
2.4 inch LCD monitor with 320 x 240 VGA resolution, 180 degree image rotation and mirror
10 mm submersible chamber
36 inch flexible neck
TV/video output socket
Useful for inspecting the engine compartment, valves, combustion chamber and other hard-to-reach areas
2.4 inch LCD monitor with 320 x 240 VGA resolution, 180 degree image rotation and mirror
10 mm submersible chamber
36 inch flexible neck
TV/video output socket
The RODAC Carbon Battery Tester is used to test the charge on 12-volt batteries, alternators, regulators and starters. It features a convenient carrying case, 35" 4G heavy-duty cable with 500 amp clamps, an analog dial for voltage and amperage, and a button for variable loads. It offers a 500 AMP charge capacity and checks batteries up to 1000 CCA / 160 amp hours, an automatic alarm after a 15...
The RODAC Carbon Battery Tester is used to test the charge on 12-volt batteries, alternators, regulators and starters. It features a convenient carrying case, 35" 4G heavy-duty cable with 500 amp clamps, an analog dial for voltage and amperage, and a button for variable loads. It offers a 500 AMP charge capacity and checks batteries up to 1000 CCA / 160 amp hours, an automatic alarm after a 15...
Quickly Tests Voltage up to 28 Volts. Heavy duty probe, cord and clamp. The probe is insulated with high-visibility shrink tubing to prevent the possibility of shorting the side of the probe to other components. Comes with a strain relief spring on the cord.
Quickly Tests Voltage up to 28 Volts. Heavy duty probe, cord and clamp. The probe is insulated with high-visibility shrink tubing to prevent the possibility of shorting the side of the probe to other components. Comes with a strain relief spring on the cord.
This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.
This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.
The RODAC OBDII diagnostic tool is ideal for reading and clearing trouble codes for car, SUV, light truck, engine and a/T systems. It allows you to review the PCM data stream with the custom one-click button for I/M, DTC for live data. The built-in LED lights and buzzer offers notification of the car ECU status. Its display available in multiple languages i.e. English, Spanish, French, German,...
The RODAC OBDII diagnostic tool is ideal for reading and clearing trouble codes for car, SUV, light truck, engine and a/T systems. It allows you to review the PCM data stream with the custom one-click button for I/M, DTC for live data. The built-in LED lights and buzzer offers notification of the car ECU status. Its display available in multiple languages i.e. English, Spanish, French, German,...
The RODAC Vehicle Battery Analyzer is designed to test the condition of the automotive battery using the conductivity method. Several good reasons to get the battery tester, it is simple, easy to use, analyzes the battery life on and off vehicle and offers accurate analysis results in seconds. Its LCD display is easy to read and the test results are based on JIS, EN, DIN, SAE and IEC standards....
The RODAC Vehicle Battery Analyzer is designed to test the condition of the automotive battery using the conductivity method. Several good reasons to get the battery tester, it is simple, easy to use, analyzes the battery life on and off vehicle and offers accurate analysis results in seconds. Its LCD display is easy to read and the test results are based on JIS, EN, DIN, SAE and IEC standards....
Works on all 1996 and newer vehicles in America and 2000 and newer in EU countries
2.4" TFT color display (220 x 176 dpi)
Operating temperature: 0 to 60°C (32 to 140°F)
Storage temperature: -20 to 70°C (-4 to 158°F)
External power: 8.0 to 18.0V supplied via vehicle battery
Dimensions: 135mm (L) X 85mm (W) X 25mm...
Works on all 1996 and newer vehicles in America and 2000 and newer in EU countries
2.4" TFT color display (220 x 176 dpi)
Operating temperature: 0 to 60°C (32 to 140°F)
Storage temperature: -20 to 70°C (-4 to 158°F)
External power: 8.0 to 18.0V supplied via vehicle battery
Dimensions: 135mm (L) X 85mm (W) X 25mm...