The RODAC bucket type oil filter wrench set has an electrostatic black oxide finish that is rust resistant. This set includes 15 pièces of different sizes to make the job easier 65mm-14F, 65/67mm-14F, 68mm-14F, 74mm-15F, 74/76mm-15F, 76mm-14F, 76mm-30F, 75/77mm-15F, 80mm-15F, 80/82mm-15F, 90mm-15F, 93mm-15F, 93mm-36F and 100mm-15F.

14 Pcs Pressure testing pump with gauge Temperature testing For most vehicules

The most economic way to check electronic fuel injection (EFI) signals Fast and easily checks for systems of GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI and GM SCPI just disconnect the fuel injector, plug the noid lite into injector, plug the noid lite into injector wiring harness then crank the engine

Lisle 14700 low profile filter socket 32mm

Performance Tool W54059 2 Pcs. strap wrench set 3/8" to 6-1/2"

Contains 8 Popular Disconnect Tools for A/C & Fuel Lines. A complete set of disconnect tools that can be stored in a handy blow-molded case. All disconnect tools are also available individually. Contains : Flex Fuel Disconnect Set AC/Fuel Line Disconnect Set Fuel Line Quick Disconnect for GM Angled AC/Fuel Line Disconnect...

Finds leaks in oil, fuel, ATF and power steering systems Store at 4.4°C (40°F) to 37.7°C (100°F)

Performance Tool W54056 oil Filter Wrench 5-5/32" to 5-11/16" X 1/2" Dr.

Performance Tool W54311 Oil filter plier (large) 3-1/4" to 4 -1/2"

Performance Tool W54054 oil Filter Wrench 4-1/8" to 4-21/32" X 1/2" Dr.

Lisle 63250 Filter wrench 3-1/8" to 3-7/8"

3/8, 1/2, 5/8 & 3/4" For 1981 to current Ford wandChrysler LH Series

Performance Tool W54047 Oil filter wrench 3-1/2" to 3-7/8"

Performance Tool W54111 Oil Filter Wrench 80mm 15FL

Scissors to Disconnect Fuel Line 5/16" & 3/8" For GM 1989 to current, Ford 1990 to current, and some Mazda models 1990 to present

6 Pt Socket : 8,12,13,14,15 et 18 mm (8 pcs) 12 Pt Socket : 24 mm Adapters : 3/8" and 1/2" Driver (2 pcs) Bit adapter : 1/4" x 5/16", 5/16" x 5/16", 10 mm x 5/16" Hex Shank Handle : 15 mm Hex Ratchating Wrench Blow Case

Fits idler pulleys requiring 15 mm, 16 mm, 18 mm hex or 3/8"or 1/2" square drive. Also includes: 13, 14 & 15 mm crowfoot wrenches.

Rodac DN-G1011 Pressure gauge for diesel truck cylinder

Overhead Valve Spring Compressor by Performance Tools

Oil Filter Wrench Jaw grip 2 3/4" to 4 1/4"

Performance Tool W80491 offset O2 sensor wrench 7/8"

5/16, 3/8, 1/2, 5/8, 3/4 & 7/8

Universal Exhaust Hanger Remover Pliers by Lisle®. Separates Exhaust Hanger Brackets From Rubber Supports. The exhaust plier works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. Simply squeeze the plier handles to force the bracket from the rubber support. Superior solution for your exhaust system service needs Perfect for use by...