Tire & Tube Mounting lubricant Sold in 5 gallons

Tire Paint Pen is a specially formulated, high quality, stick-to-rubber paint that will give your tires a unique look and wow any onlookers down the road. Its UV protective paint ensures that colours will remain vibrant against tough weather and the harshest elements on the road. Can be used on both sidewall and inner tread of tire.

Plug Receiving Tube : O.D.: 2-1/4" - I.D. : 2" - Length : 2" O.D.: 2-1/2" - I.D. : 2-1/4" - Length : 1-1/2" O.D.: 2-1/2" - I.D. : 2-1/4" - Length : 3/4" O.D.: 2-1/2" - I.D. : 2-1/4" - Length : 2-3/4" O.D.: 3" - I.D. : 2-3/4" - Length : 2-1/4" O.D.: 2-3/4" - I.D. : 2-7/16" - Length : 2-1/4" O.D.: 2-7/8" - I.D. : 2-5/8" - Length : 2-7/8" O.D.: 2-7/16" - I.D. : 2-3/16" -...

Head protector for RDS32091A and RDS32098

Large centering cone TR36 for RDU100 (truck 3/4 & 1 ton) 36mm

The 3-bar, 4-bar and 5-bar tire inflation cages are used for changing and inflating tires for trucks, buses, military vehicles, etc. These truly heavy-duty inflation cages are manufactured in our Canadian plant using steel that meets the toughest standards in North America. MARTINS safety cages, a mandatory precaution for tire inflation,...

Ken Tool 32552 MET TRM2 Double-end Truck Wrench 124mm x 33mm

Tire Paint Pen is a specially formulated, high quality, stick-to-rubber paint that will give your tires a unique look and wow any onlookers down the road. Its UV protective paint ensures that colours will remain vibrant against tough weather and the harshest elements on the road. Can be used on both sidewall and inner tread of tire.

Ken Tool 32109 Tire changer for small T9A tires, 9"L x 7/16"

Large centering cone TR40 for RDG55 (truck 3/4 & 1 ton) 40mm

I-Frame 1 KNT33199 TIRE MOUNTING / DEMOUNTING TOOL 38" L

Head flat protector (replacement part for Rodac tire changers) Model RDS32091A  Model RDS32098 

Motorcycle tire changer adaptor for RDS32091A and RDS32098

Quick release nut (replacement part for Rodac wheel balancers) Model RDG55 Model RDU100

Ken Tool 34644 Tire Mounting/Demounting Spoon T45A-2000, 37" x 3/4"

Ken Tool 32116 Tire Changer for Small T16A tires, 16"L x 7/16"

Ken Tool 32115 Tire changer for small T5 tires, 16"L x 7/16"

Lisle 19852 Truck and trailer wheel pan

Lifting lever for RDS32091A and RDS32098

Ken Tool 35837 Tire and rim lube 7.5 lb.

Ken Tool 33341 Bead-Breaking tool T41 30" L 7/8"

The RODAC 10 gallon tire mounting tool is designed to install tires on the rim easily, safely and quickly, no more waiting for long hours at the mechanic shop when you can do your own tire inflation.

The RODAC pressurized air jet tire changer, powered by 110V (1ph), accommodates tires from 14 to 26 inches on the inside and from 12 to 23 inches on the outside, with an operating pressure of 8-10 bar / 116-145 psi. It is suitable for wheels with a maximum diameter of 1143 mm and a maximum width of 406 mm.

This RODAC wheel balancer, operating on a 110-volt single-phase power supply, offers 5 balancing modes. It balances wheels at a speed of 200 revolutions per minute and can handle wheels weighing up to 65 kg.