CGW 63076 aluminum oxide shop roll 150 grit 1-1/2" x 50 yards

CGW 63082 aluminum oxide shop roll 60 grit 2" x 50 yard

CGW 63084 aluminum oxide shop roll 100 grit 2" x 50 yards

3/8" Drive Impact Extension Bar w/Steel Ball, 125mmL (CR-Mo) 3/8" drive 125 mm

This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.

Metric hand socket display board, 105 pieces 1/4", 3/8" & 1/2" Drive

Adjustable Wrench with display 44 pieces

Genius AC-417 17 accessories display 1/2" Dr.

1/4" Drive 1/4" Hex Shank Bit Holder, 25mm

Turbo XL FP1012-B 12V 10 GPM Diesel Transfer Pump

Battery operated transfer pump. Gas can not included

 RODAC cast iron compressor pump with 3 heads has a power of 5.0 HP and a flow rate of 16.5 CFM

The 1" RODAC Orange Bow Punch is ideal for drilling round holes in sealants, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.

GPI 155000-01 gasoline hand gun 3/4" NPT

12 RODAC wooden flat brushes, 4" wide. Enhance the appeal of your home with these brushes. With a 3" wide flat head they provide an even finish. Ideal for stain, resin, glue and grease.

High temperature paint designed for use on header pipes For temperatures up to 1300-2000°F (704-1093°C) Will renew and extend the life of any surface exposed to extremely high temperatures Provides a matte finish with a silicone ceramic coating Flat black colour 312 g size

VHT Caliper Paint has been specifically designed for the custom detailing of brake components. It is heat resistant to 900°F (482°C) intermittent and will not chip, crack, fade or rust even under extremes of operation or road and weather conditions. It is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential. Applications: Brake Calipers, Rotors,...

Dupli-Color CDA1670-6 White Acrylic Enamel paint (6 units) 340g

Emzone 44039 Salt and stain remover (case of 12) 15oz

Input : 3/4" - Output : 1" Capacity : 900Nm / 650ft/lb - 900Nm / 2000ft/lb Features : Output/input 3/1

The 17/32" RODAC black and gold high speed steel (HSS) bit with ½" chuck offers 3 inking for less slippage on the chuck and a 135° cross point.

Champion XL28964-12 Mechanic's drill flatted shank XL28 9/64" (12 units)

Champion XL2812-6 Mechanic's drill flatted shank XL28 1/2" (6 pcs.)

Champion XL28116-12 Mechanic's drill flatted shank XL28 1/16" (12 units)