2 stage tall transmission jack Capacity : 1,000 lb Minimum height : 33-1/2" Maximum height :72-1/2"

Quickly checks spark at plug wire A handy tool to check ignition spark without removing the spark plug. The tool is specially calibrated to measure ignition voltage. Works on both standard and electronic ignition systems. Easy to use. Simply adjust calibration screw to proper gap size. Attach spark plug wire to end of tester. Clamp tester...

3" Disc + pads, rubber molded pistol grip, adjustable power regulator, 2-fingered progressive throttle, silent handle exhaust. 

Champion 3043414 taper pipe tap 3/4"-14 NPT

Input power: 110/230V Rated input current: 42-40A Rated input capacity: 4.6/8.8kVA Rated open circuit voltage: 78V Welding current adjustment range : 15-200A Rated output (A) 20°C/40°C: 30%/20% @ 200 Weight: 5.1kg Electrode diameter : 1.6-5.0mm

Locking C-clamp with Swivel Pad 18 SP - 18" x 8"

Heavy Duty 2.75" x 17.5" 5,000 RPM 1/4" NPTF

CGW 63072 aluminum oxide shop roll 60 grit 1-1/2" x 50 yards

CGW 63076 aluminum oxide shop roll 150 grit 1-1/2" x 50 yards

CGW 63082 aluminum oxide shop roll 60 grit 2" x 50 yard

CGW 63084 aluminum oxide shop roll 100 grit 2" x 50 yards

3/8" Drive Impact Extension Bar w/Steel Ball, 125mmL (CR-Mo) 3/8" drive 125 mm

This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.

Metric hand socket display board, 105 pieces 1/4", 3/8" & 1/2" Drive

Adjustable Wrench with display 44 pieces

Genius AC-417 17 accessories display 1/2" Dr.

GPI 129003-1 Rotary hand pump with 2" NPT connection

Turbo XL FP1012-B 12V 10 GPM Diesel Transfer Pump

Battery operated transfer pump. Gas can not included

The 1" RODAC Orange Bow Punch is ideal for drilling round holes in sealants, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.

GPI 155000-01 gasoline hand gun 3/4" NPT

12 RODAC wooden flat brushes, 4" wide. Enhance the appeal of your home with these brushes. With a 3" wide flat head they provide an even finish. Ideal for stain, resin, glue and grease.

High temperature paint designed for use on header pipes For temperatures up to 1300-2000°F (704-1093°C) Will renew and extend the life of any surface exposed to extremely high temperatures Provides a matte finish with a silicone ceramic coating Flat black colour 312 g size

VHT Caliper Paint has been specifically designed for the custom detailing of brake components. It is heat resistant to 900°F (482°C) intermittent and will not chip, crack, fade or rust even under extremes of operation or road and weather conditions. It is easy to apply, dries quickly and is remarkably resistant. Careful preparation is essential. Applications: Brake Calipers, Rotors,...