This RODAC digital wheel balancer operates on a 110-volt single-phase power supply, making it ideal for balancing wheels weighing up to 65 kilograms. It offers 6 operating modes, rotates at a speed of 200 revolutions per minute, and ensures balancing accuracy within ±1 gram.

Merithian 47014 black convoluted slit tubing 1/4" x 50'

Rodac 54130 Non-slip mat 12'' x 12'' Black 12" x 12"

Performance Tool W1286 Magnetic Tool Holders (3 pieces) 8", 12" & 18"

Input power: 115V Rated input current: 12.5A Rated input capacity: 2.88kVA Rated open circuit voltage: 31V Welding current adjustment range : 60-90A Rated output (A) 20°C/40°C: 20% @ 90 Weight: 16.8kg Wire flux diameter: 0.8-0.9mm

CGW 63079 aluminum oxide shop roll 240 grit 1-1/2" x 50 yards

CGW 63077 aluminum oxide shop roll 180 grit 1-1/2" x 50 yards

CGW 63084 aluminum oxide shop roll 100 grit 2" x 50 yards

Heavy duty 15" x 5.5" Receiver funnel Extends from 45" to 70" Two 6" fixed axle wheels Two swivel casters for maximum maneuverability 8" discharge hose with shut off valve Fluid level gauge is on the hose Air pressure valve

Genius 887475 Torque limiting extension 475 ft/lb. x 254mm x 1" Dr.

Metric hand socket display board, 105 pieces 1/4", 3/8" & 1/2" Drive

Adjustable Wrench with display 44 pieces

Genius AC-417 17 accessories display 1/2" Dr.

Performance Tool W87022 GM Power Steering Pump Pulley Setter and Puller

12 Volts DC fuel transfer pump GPI 15 GPM Aluminum gear pump Duty cycle: 30 min. ON / 30 min. OFF Cord: 18’ x 12/2AWG Hose: 10’ x 3/4” Manual nozzle Compatible : Diesel, gas and kerosene Made in USA CSA approved 2 years warranty

RODAC cast iron compressor pump with 2 heads has a power of 1.0 HP and a flow rate of 5.6 CFM 

 RODAC cast iron compressor pump with 3 heads has a power of 5.0 HP and a flow rate of 16.5 CFM

Paint Tank with Spray Gun 2-1/2 gal. tank(10 Liters) Air pressure 43 - 58 psi Consumption : 6.0 - 8.8 cfm Spray gun and hose include Needle : 2 mm Hose : 10'

Lisle 46000 plier for internal-external locking rings with 4 tips

High Performance Cast Aluminum Brake Paint 6 Units Spray Can 11 oz Haute température 900°F (482°C)

Black and Gold H.D. HSS Drill Bit Size : 15/64" 3 Flat shank for less chuck slippage.

Champion XL281164-12 Mechanic's drill flatted shank XL28 1-1/64" (12 units)

Performance Tool 60309 Dual Head Digital Pressure Gauge with LED 5-99 PSI

3/8" Drive Hinge Handle, 200mm 3/8" drive 200mm