Long Sleeve 100mm for Rodac 2 post car lift RDPL402B

This RODAC digital wheel balancer operates on a 110-volt single-phase power supply, making it ideal for balancing wheels weighing up to 65 kilograms. It offers 6 operating modes, rotates at a speed of 200 revolutions per minute, and ensures balancing accuracy within ±1 gram.

Rodac 54795 miracle wash mop

Size : 2.5 x14.0 mm Length :365 mmL

Rubber Grip 0.8 x 5.0 mm L1 mm : 250 mm Length mm : 330 mm Shank type : D

Square Size: #2 Shank mm : 110 mm Length : 210 mmL

Rodac 54130 Non-slip mat 12'' x 12'' Black 12" x 12"

Turbo Xl DD600 Drum Cradles 600 lb.

CGW 63079 aluminum oxide shop roll 240 grit 1-1/2" x 50 yards

CGW 63084 aluminum oxide shop roll 100 grit 2" x 50 yards

Heavy duty 15" x 5.5" Receiver funnel Extends from 45" to 70" Two 6" fixed axle wheels Two swivel casters for maximum maneuverability 8" discharge hose with shut off valve Fluid level gauge is on the hose Air pressure valve

Single air regulator by Turbo XL ½" NPT

Genius 640250 Molybdenum impact extension with pin hole 250mm x 3/4" Dr.

Hydraulic Press 12 ton 0 - 24" Ram travel: 7" #bed adjust. : 8 Space interval : 3½" Distance between posts : 16¾" Bed depth : 7" Throat width : 14" Troat depth : 3¼" 30.5" x 25.6" x 65.4"

Metric hand socket display board, 105 pieces 1/4", 3/8" & 1/2" Drive

Adjustable Wrench with display 44 pieces

Genius AC-417 17 accessories display 1/2" Dr.

Turbo XL 326 Gear oil transfer pump 60L with 6' flexible hose

12 Volts DC fuel transfer pump GPI 15 GPM Aluminum gear pump Duty cycle: 30 min. ON / 30 min. OFF Cord: 18’ x 12/2AWG Hose: 10’ x 3/4” Manual nozzle Compatible : Diesel, gas and kerosene Made in USA CSA approved 2 years warranty

RODAC cast iron compressor pump with 2 heads has a power of 1.0 HP and a flow rate of 5.6 CFM 

Genius 564286 Long tapered punch 6" x 280mm

Genius 566168 Pin punch SAE 1/4" x 160mm

Lisle 46000 plier for internal-external locking rings with 4 tips

Genius 551252 forged retaining ring plier Internal Straight 12"