This RODAC digital wheel balancer operates on a 110-volt single-phase power supply, making it ideal for balancing wheels weighing up to 65 kilograms. It offers 6 operating modes, rotates at a speed of 200 revolutions per minute, and ensures balancing accuracy within ±1 gram.
This RODAC digital wheel balancer operates on a 110-volt single-phase power supply, making it ideal for balancing wheels weighing up to 65 kilograms. It offers 6 operating modes, rotates at a speed of 200 revolutions per minute, and ensures balancing accuracy within ±1 gram.
The RODAC PLATINUM stainless steel hose expander set is ideal for expanding any type of exhaust hose from 1-5/8" to 4-1/4". This set is an inexpensive alternative to hydraulic hose expanders.
The RODAC PLATINUM stainless steel hose expander set is ideal for expanding any type of exhaust hose from 1-5/8" to 4-1/4". This set is an inexpensive alternative to hydraulic hose expanders.
This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.
This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.
The most economic way to check electronic fuel injection (EFI) signals Fast and easily checks for systems of GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI and GM SCPI just disconnect the fuel injector, plug the noid lite into injector, plug the noid lite into injector wiring harness then crank the engine
The most economic way to check electronic fuel injection (EFI) signals Fast and easily checks for systems of GM TBI, Bosch PFI, Ford TBI, GM PFI, Geo TBI and GM SCPI just disconnect the fuel injector, plug the noid lite into injector, plug the noid lite into injector wiring harness then crank the engine
The RODAC tire changer, powered by 110V (1ph), accommodates tires from 14 to 26 inches on the inside and from 12 to 23 inches on the outside, with an operating pressure of 8-10 bar / 116-145 psi. It is suitable for wheels with a maximum diameter of 1143 mm and a maximum width of 406 mm.
The RODAC tire changer, powered by 110V (1ph), accommodates tires from 14 to 26 inches on the inside and from 12 to 23 inches on the outside, with an operating pressure of 8-10 bar / 116-145 psi. It is suitable for wheels with a maximum diameter of 1143 mm and a maximum width of 406 mm.
These remote control panels can be mounted up to 50 feet (15 meters) away for convenient status monitoring and ON/OFF inverter, power saving enable/disable activation.
These remote control panels can be mounted up to 50 feet (15 meters) away for convenient status monitoring and ON/OFF inverter, power saving enable/disable activation.
The RODAC bucket type oil filter wrench set is ideal for making the job easier. This 23-piece die-cast aluminum box set ranges in size from 65 to 101mm.
The RODAC bucket type oil filter wrench set is ideal for making the job easier. This 23-piece die-cast aluminum box set ranges in size from 65 to 101mm.