This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.
This RODAC pressure meter has a 3” gauge with dual readings, measuring 0-500 psi and 0-35 bar, and a 24” oil proof hose made of 1/8” NPT. ¼” NPT and 3/8” NPT adapters are also included.
Useful for inspecting the engine compartment, valves, combustion chamber and other hard-to-reach areas
2.4 inch LCD monitor with 320 x 240 VGA resolution, 180 degree image rotation and mirror
10 mm submersible chamber
36 inch flexible neck
TV/video output socket
Useful for inspecting the engine compartment, valves, combustion chamber and other hard-to-reach areas
2.4 inch LCD monitor with 320 x 240 VGA resolution, 180 degree image rotation and mirror
10 mm submersible chamber
36 inch flexible neck
TV/video output socket
A 2-in-1 Tester that Tests Circuits up to 12 Volts and Works as a Jumper Wire for Power or Ground. Heavy-duty circuit tester for checking low voltage up to 12 volts. By depressing the red button the tester becomes a jumper for powering electrical components or a ground. The probe, handle, cord and clamp are reinforced for durability. Comes with a strain relief spring on the cord.
A 2-in-1 Tester that Tests Circuits up to 12 Volts and Works as a Jumper Wire for Power or Ground. Heavy-duty circuit tester for checking low voltage up to 12 volts. By depressing the red button the tester becomes a jumper for powering electrical components or a ground. The probe, handle, cord and clamp are reinforced for durability. Comes with a strain relief spring on the cord.
Precise, Durable, Capable.TOPDON’s BT300P is our newest 12V lead-acid vehicle battery tester with a Built-in Printer. It can test 100 to 2000 Cold Cranking Amps (CCA) batteries. It’s compatible with Flooded, AGM, GEL, and EFB batteries; and has accredited standards including: CCA, JIS, EN, DIN, SAE and IEC.
Precise, Durable, Capable.TOPDON’s BT300P is our newest 12V lead-acid vehicle battery tester with a Built-in Printer. It can test 100 to 2000 Cold Cranking Amps (CCA) batteries. It’s compatible with Flooded, AGM, GEL, and EFB batteries; and has accredited standards including: CCA, JIS, EN, DIN, SAE and IEC.
A/C Cool 12A Refrigerant Easy-Fill oers an all-in-one product for refilling your A/C system. The recharge hose with trigger and gauge oers a fast and easy recharge solution.
Environmentally friendly and safe for the ozone layer.
A/C Cool 12A Refrigerant Easy-Fill oers an all-in-one product for refilling your A/C system. The recharge hose with trigger and gauge oers a fast and easy recharge solution.
Environmentally friendly and safe for the ozone layer.
The RODAC Carbon Battery Tester is used to test the charge on 12-volt batteries, alternators, regulators and starters. It features a convenient carrying case, 35" 4G heavy-duty cable with 500 amp clamps, an analog dial for voltage and amperage, and a button for variable loads. It offers a 500 AMP charge capacity and checks batteries up to 1000 CCA / 160 amp hours, an automatic alarm after a 15...
The RODAC Carbon Battery Tester is used to test the charge on 12-volt batteries, alternators, regulators and starters. It features a convenient carrying case, 35" 4G heavy-duty cable with 500 amp clamps, an analog dial for voltage and amperage, and a button for variable loads. It offers a 500 AMP charge capacity and checks batteries up to 1000 CCA / 160 amp hours, an automatic alarm after a 15...