The RODAC pressurized air jet tire changer operates on 110V (1ph) power and accommodates tires from 14 to 28 inches on the inside and from 12 to 26 inches on the outside, with an operating pressure of 8-10 bar / 116-145 psi. It is suitable for wheels with a maximum diameter of 1143 mm and a maximum width of 406 mm.

The RODAC pressurized air jet tire changer, powered by 110V (1ph), accommodates tires from 14 to 26 inches on the inside and from 12 to 23 inches on the outside, with an operating pressure of 8-10 bar / 116-145 psi. It is suitable for wheels with a maximum diameter of 1143 mm and a maximum width of 406 mm.

Weather Sealed High Performance Motor and Solenoids Heavy Duty 3 Stage Gearbox and Drum Supports Full Steel Planetary Gearing Full Load Holding Brake Every winch is 100% Load Tested Chip Resistant Gloss Paint Finish

Lifts small engines, transmissions, building supplies easily and more 9' wired remote control with emergency stop button 40' (12m) long steel cable with a diameter of 0.24" (6.2mm)

Residential, commercial and industrial use Lifts small engines, transmissions, building supplies easily 9' wired remote control with emergency stop button 40' (12m) long steel cable with a diameter of 0.16" (4.5mm)

Two-post 240V 4-ton Rodac car lift, suitable for standard-sized vehicles, providing secure lifting capacity.

2000lb swivel hydraulic lifting crane with base for fixing

Ideal for large ATV's and small trailers Sealed High Power Motor Heavy Duty Contactors and Controller Socket are Watertight Full Steel Planetary Gearing strengthened steel drum Also suitable for Synthetic Rope Glossy, chip-resistant paint

Weather Sealed High Performance Motor and Solenoids Heavy Duty 3 Stage Gearbox and Drum Supports Full Steel Planetary Gearing Full Load Holding Brake Every winch is 100% Load Tested Chip Resistant Gloss Paint Finish

Laser etched extruded Aluminum tie bars, reinforced with Steel body Double sealed motor to ensure product meets IP68 water and dust standards 3 sealed Planetary gears and maintenance free bearings provide quiet and silky-smooth performance Fully sealed 600 amp copper contactors to prevent corrosion and electrical...

Weather Sealed High Performance Motor and Solenoids Heavy Duty 3 Stage Gearbox and Drum Supports Full Steel Planetary Gearing Full Load Holding Brake Every winch is 100% Load Tested Chip Resistant Gloss Paint Finish

Double Gear Ratcheting Strap Puller Capacity : 2 tons Width of the nylon strap : 1" 6' of reach Laminated steel ratchet wheel Plated steel for rust resistance Drop forged safety hooks

Capacity : 3.5 tons Saddle diameter : 3-3/8" Minimum height : 5.5" Maximum height : 22"

 RODAC cast iron compressor pump with 2 heads has a flow rate of 11.2 CFM and 3.0 HP

 RODAC cast iron compressor pump with 3 heads has a power of 5.0 HP and a flow rate of 16.5 CFM

RODAC 3-Head Cast Iron Compressor Pump 5.0 HP and 18.5 CFM

RODAC cast iron compressor pump with 2 heads has a power of 1.0 HP and a flow rate of 5.6 CFM 

Ceco CDOC wheel Backspace and Offset gauge

CGW 48227 Cut-off Wheel Mandrel Adaptor 1/4"-3/8"

Standard duty 5.3 joule 1/4" NPTF 1/2" square shank 4,800 blows per minute

Heavy Duty 2.75" x 17.5" 5,000 RPM 1/4" NPTF

Standard duty 1/2" drive 450 ft/lb 9,000 RPM 1/4" NPTF

Heavy duty 7.2 joule. 1/4" NPTF. Standard .401" round shank. 3,200 blows per minute. Includes : 4 chisels a Posi-lock retainer a case

Heavy duty 9.5 joule. 1/4" NPTF. Standard .401" round shank. 2,300 blows per minute. Includes 4 chisels and a case